Available Upon Request
SAV-60MXL037-1A X 1/4
Timing Belt Pulley. .80 MXL Pitch. 60 Grooves. for 3/8" Wide Belt. 0.2500" Bore. Aluminum. Shaft Saver
Price
$18.98
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $18.98 | $16.73 | $15.64 | $14.64 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-60MXL037-1A X 1/4
- Material
- Aluminum
- Pitch
- .080 MXL
- No. of Grooves
- 60
- Pitch Dia.
- 1.528
- Outside Dia.
- 1.508
- Flange O.D.
- 1.730
- Hub Type
- Shaft Saver
- Belt Width
- 0.3750
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.530
- Overall Length
- 27/32
- Hub Proj.
- 0.3125
- Hub Dia.
- 1.222
- Set Screws
- 8-32(2)
- Alt. Part Number
- 60MXL037-1A X 1/4
SAV-60MXL037-1A X 1/4 is a standard timing pulley for .080 MXL pitch and 3/8" wide belts. It is a 6F type timing pulley with 2 flanges, which has 60 grooves. The entire part is made of Aluminum.
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
.080 MXL Pitch
60 Grooves
Suitable for a belt width of 3/8"
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
.080 MXL Pitch
60 Grooves
Suitable for a belt width of 3/8"
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost