Available Upon Request
SAV-22M312-1A X 1/8
Timing Belt Pulley. 40PD Pitch. 22 Grooves. for 5/16" Wide Belt. 0.1250" Bore. Aluminum. Shaft Saver
Price
$18.78
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $18.78 | $17.61 | $16.43 | $13.77 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-22M312-1A X 1/8
- Material
- Aluminum
- Pitch
- .0816″ (40 DP)
- No. of Grooves
- 22
- Pitch Dia.
- 0.572
- Outside Dia.
- 0.558
- Flange O.D.
- 0.740
- Hub Type
- Shaft Saver
- Belt Width
- 0.3125
- Type
- 6F
- Bore (+.001 - .000)
- 0.1250
- Face Width
- 0.449
- Overall Length
- 0.6875
- Hub Proj.
- 15/64
- Hub Dia.
- 0.390
- Set Screws
- 4-40(2)
- Alt. Part Number
- 22M312-1A X 1/8
SAV-22M312-1A X 1/8 timing belt pulley is a stock product made of Aluminum, which is suitable for 40DP pitch and 5/16" wide belts, and has 22 grooves. This pulley is the 6F type and features 2 flanges.
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
40DP Pitch
22 Grooves
Suitable for a belt width of 5/16"
Bore of 0.125"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
40DP Pitch
22 Grooves
Suitable for a belt width of 5/16"
Bore of 0.125"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost