Available Upon Request
SAV-40M312-2A X 1/4
Timing Belt Pulley. 40PD Pitch. 40 Grooves. for 5/16" Wide Belt. 0.2500" Bore. Aluminum. Shaft Saver
Price
$16.76
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $16.76 | $16.12 | $15.49 | $13.22 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-40M312-2A X 1/4
- Material
- Aluminum
- Pitch
- .0816″ (40 DP)
- No. of Grooves
- 40
- Pitch Dia.
- 1.040
- Outside Dia.
- 1.026
- Flange O.D.
- NA
- Hub Type
- Shaft Saver
- Belt Width
- 0.3125
- Type
- 6
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.500
- Overall Length
- 0.875
- Hub Proj.
- 0.375
- Hub Dia.
- 0.666
- Set Screws
- 8-32(2)
- Alt. Part Number
- 40M312-2A X 1/4
SAV-40M312-2A X 1/4, which has 40 grooves, is one of the timing belt pulleys available in our Inch Product Catalog. It is designed for 40DP pitch and 5/16" wide belts. The entire part is made of Aluminum.
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
40DP Pitch
40 Grooves
Suitable for a belt width of 5/16"
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
40DP Pitch
40 Grooves
Suitable for a belt width of 5/16"
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost