Available Upon Request
SAV-15XL037-2A X 5/16
Timing Belt Pulley. 1/5 XL Pitch. 15 Grooves. for 3/8" Wide Belt. 0.3125 " Bore. Aluminum. Shaft Saver
Price
$14.88
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $14.88 | $14.39 | $13.21 | $12.06 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-15XL037-2A X 5/16
- Material
- Aluminum
- Pitch
- 1/5 XL
- No. of Grooves
- 15
- Pitch Dia.
- 0.955
- Outside Dia.
- 0.935
- Flange O.D.
- NA
- Hub Type
- Shaft Saver
- Belt Width
- 0.3750
- Type
- 6
- Bore (+.001 - .000)
- 0.3125
- Face Width
- 0.5625
- Overall Length
- 0.875
- Hub Proj.
- 0.3125
- Hub Dia.
- 0.6875
- Set Screws
- 8-32(2)
- Alt. Part Number
- 15XL037-2A X 5/16
SAV-15XL037-2A X 5/16 is one of our stock timing belt pulleys. It features 15 grooves and is compatible with 1/5 XL pitch and 3/8" wide belts. The entire part is made of Aluminum.
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.Features and Benefits:
Made of Aluminum
15 Grooves
1/5 XL Pitch
Bore of 0.3125"
For 3/8" wide belt
Suitable with our timing pulley belts.
Compatible with York’s timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.Features and Benefits:
Made of Aluminum
15 Grooves
1/5 XL Pitch
Bore of 0.3125"
For 3/8" wide belt
Suitable with our timing pulley belts.
Compatible with York’s timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost