-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
Available Upon Request
SAV-28XL037-1S X 1/4
Timing Belt Pulley. 1/5 XL Pitch. 28 Grooves. for 3/8" Wide Belt. 0.2500 " Bore. Steel. Shaft Saver
Price
$25.40
| Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
|---|---|---|---|---|---|
| Price unit | $25.40 | $23.37 | $21.33 | $19.28 | |
| Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-28XL037-1S X 1/4
- Material
- Steel
- Pitch
- 1/5 XL
- No. of Grooves
- 28
- Pitch Dia.
- 1.783
- Outside Dia.
- 1.763
- Flange O.D.
- 2.000
- Hub Type
- Shaft Saver
- Belt Width
- 0.3750
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.5625
- Overall Length
- 29/32
- Hub Proj.
- 0.34375
- Hub Dia.
- 1.1875
- Set Screws
- 8-32(2)
- Alt. Part Number
- 28XL037-1S X 1/4
SAV-28XL037-1S X 1/4 is a standard timing pulley for 1/5 XL pitch and 3/8" wide belts. It is a 6F type timing pulley with 2 flanges, which has 28 grooves. The entire part is made of Steel.
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.Features and Benefits:
Pitch: 1/5 XL
No of Grooves: 28
For Belt: 3/8" Wide
Bore: 0.25"
Material: Steel
Shaft Saver installation
Suitable with York’s timing pulley belts.
York holds certification to ISO 9001 standards, ensuring quality management. Additionally, all products adhere to RoHS/REACH compliance.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.Features and Benefits:
Pitch: 1/5 XL
No of Grooves: 28
For Belt: 3/8" Wide
Bore: 0.25"
Material: Steel
Shaft Saver installation
Suitable with York’s timing pulley belts.
York holds certification to ISO 9001 standards, ensuring quality management. Additionally, all products adhere to RoHS/REACH compliance.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
