Available Upon Request
SAV-28XL037-1A X 3/8
Timing Belt Pulley. 1/5 XL Pitch. 28 Grooves. for 3/8" Wide Belt. 0.3750 " Bore. Aluminum. Shaft Saver
Price
$22.69
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $22.69 | $21.81 | $19.72 | $17.63 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-28XL037-1A X 3/8
- Material
- Aluminum
- Pitch
- 1/5 XL
- No. of Grooves
- 28
- Pitch Dia.
- 1.783
- Outside Dia.
- 1.763
- Flange O.D.
- 2.000
- Hub Type
- Shaft Saver
- Belt Width
- 0.3750
- Type
- 6F
- Bore (+.001 - .000)
- 0.3750
- Face Width
- 0.5625
- Overall Length
- 29/32
- Hub Proj.
- 0.34375
- Hub Dia.
- 1.1875
- Set Screws
- 10-32(2)
- Alt. Part Number
- 28XL037-1A X 3/8
SAV-28XL037-1A X 3/8 is a standard timing pulley for 1/5 XL pitch and 3/8" wide belts. It is a 6F type timing pulley with 2 flanges, which has 28 grooves. The entire part is made of Aluminum.
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
1/5 XL Pitch
28 Grooves
Suitable for a belt width of 3/8"
Bore of 0.375"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
1/5 XL Pitch
28 Grooves
Suitable for a belt width of 3/8"
Bore of 0.375"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost