Available Upon Request
SAV-36XL037-2A X 1/2
Timing Belt Pulley. 1/5 XL Pitch. 36 Grooves. for 3/8" Wide Belt. 0.5000 " Bore. Aluminum. Shaft Saver
Price
$20.90
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $20.90 | $20.10 | $18.23 | $16.35 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-36XL037-2A X 1/2
- Material
- Aluminum
- Pitch
- 1/5 XL
- No. of Grooves
- 36
- Pitch Dia.
- 2.292
- Outside Dia.
- 2.272
- Flange O.D.
- NA
- Hub Type
- Shaft Saver
- Belt Width
- 0.3750
- Type
- 6
- Bore (+.001 - .000)
- 0.5000
- Face Width
- 0.5625
- Overall Length
- 1.000
- Hub Proj.
- 0.4375
- Hub Dia.
- 1.500
- Set Screws
- 1/4-20(2)
- Alt. Part Number
- 36XL037-2A X 1/2
SAV-36XL037-2A X 1/2 is one of our stock timing belt pulleys. It features 36 grooves and is compatible with 1/5 XL pitch and 3/8" wide belts. The entire part is made of Aluminum.
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
1/5 XL Pitch
36 Grooves
Suitable for a belt width of 3/8"
Bore of 0.5"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
1/5 XL Pitch
36 Grooves
Suitable for a belt width of 3/8"
Bore of 0.5"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost