Available Upon Request
SAV-28-2GT09-1A X 1/4
Timing Belt Pulley. 2MM GT®2 Pitch. 28 Grooves. for 9mm Wide Belt. 0.2500" Bore. Aluminum. Shaft Saver
Price
$19.13
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $19.13 | $18.04 | $16.94 | $14.13 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-28-2GT09-1A X 1/4
- Material
- Aluminum
- Pitch
- 2mm GT2
- No. of Grooves
- 28
- Pitch Dia.
- 0.702
- Outside Dia.
- 0.682
- Flange O.D.
- 0.895
- Hub Type
- Shaft Saver
- Belt Width
- 9mm
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.514
- Overall Length
- 13/16
- Hub Proj.
- 19/64
- Hub Dia.
- 0.494
- Set Screws
- 6-40(2)
- Alt. Part Number
- 28-2GT09-1A X 1/4
SAV-28-2GT09-1A X 1/4 timing belt pulley is a stock product made of Aluminum, which is suitable for 2mm GT®2 pitch and 9mm wide belts, and has 28 grooves. This pulley is the 6F type and features 2 flanges.
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
2mm GT®2 Pitch
28 Grooves
Suitable for a belt width of 9mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
2mm GT®2 Pitch
28 Grooves
Suitable for a belt width of 9mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost