Available Upon Request
SAV-17-3M-15 X 3/16
Timing Belt Pulley. 3MM HTD® Pitch. 17 Grooves. for 15mm Wide Belt. 0.1875" Bore. Shalf Saver. Aluminum
Price
$20.73
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $20.73 | $19.93 | $19.14 | $17.42 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-17-3M-15 X 3/16
- Material
- Aluminum
- Pitch
- 3mm HTD
- No. of Grooves
- 17
- Pitch Dia.
- 0.639
- Outside Dia.
- 0.609
- Flange O.D.
- 0.740
- Hub Type
- Shaft Saver
- Belt Width
- 15
- Type
- 6FC
- Bore (+.001 - .000)
- 0.1875
- Face Width
- 0.637
- Overall Length
- 0.927
- Hub Proj.
- -
- Hub Dia.
- 0.740
- Set Screws
- 6-40(2)
- Alt. Part Number
- 17-3M-15 X 3/16
SAV-17-3M-15 X 3/16, which has 17 grooves, is one of the timing belt pulleys available in our Inch Product Catalog. It is designed for 3MM HTD® pitch and 15mm wide belts. The entire part is made of Aluminum.
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
3MM HTD® Pitch
17 Grooves
Suitable for a belt width of 15mm
Bore of 0.1875"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are commonly utilized in a range of industries such as automation, robotics, medical, packaging, sorting, food processing, and others.
Features and Benefits:
3MM HTD® Pitch
17 Grooves
Suitable for a belt width of 15mm
Bore of 0.1875"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost