-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
Available Upon Request
SAV-18-3M-09 X 1/4
Timing Belt Pulley. 3MM HTD® Pitch. 18 Grooves. for 9mm Wide Belt. 0.2500" Bore. Shalf Saver. Aluminum
Price
$19.49
| Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
|---|---|---|---|---|---|
| Price unit | $19.49 | $18.06 | $16.64 | $13.94 | |
| Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-18-3M-09 X 1/4
- Material
- Aluminum
- Pitch
- 3mm HTD
- No. of Grooves
- 18
- Pitch Dia.
- 0.677
- Outside Dia.
- 0.647
- Flange O.D.
- 0.790
- Hub Type
- Shaft Saver
- Belt Width
- 9
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.506
- Overall Length
- 13/16
- Hub Proj.
- -
- Hub Dia.
- 0.442
- Set Screws
- 8-32(2)
- Alt. Part Number
- 18-3M-09 X 1/4
SAV-18-3M-09 X 1/4 timing belt pulley is a stock product made of Aluminum, which is suitable for 3MM HTD® pitch and 9mm wide belts, and has 18 grooves. This pulley is the 6F type and features 2 flanges.
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
3MM HTD® Pitch
18 Grooves
Suitable for a belt width of 9mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
3MM HTD® Pitch
18 Grooves
Suitable for a belt width of 9mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
