Available Upon Request
SAV-22-3M-15 X 1/4
Timing Belt Pulley. 3MM HTD® Pitch. 22 Grooves. for 15mm Wide Belt. 0.2500" Bore. Shalf Saver. Aluminum
Price
$18.58
Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
---|---|---|---|---|---|
Price unit | $18.58 | $17.83 | $17.08 | $15.51 | |
Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-22-3M-15 X 1/4
- Material
- Aluminum
- Pitch
- 3mm HTD
- No. of Grooves
- 22
- Pitch Dia.
- 0.827
- Outside Dia.
- 0.797
- Flange O.D.
- 0.945
- Hub Type
- Shaft Saver
- Belt Width
- 15
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.742
- Overall Length
- 1.057
- Hub Proj.
- -
- Hub Dia.
- 0.562
- Set Screws
- 8-32(2)
- Alt. Part Number
- 22-3M-15 X 1/4
SAV-22-3M-15 X 1/4 timing belt pulley is a stock product made of Aluminum, which is suitable for 3MM HTD® pitch and 15mm wide belts, and has 22 grooves. This pulley is the 6F type and features 2 flanges.
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
3MM HTD® Pitch
22 Grooves
Suitable for a belt width of 15mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
The timing belt pulleys we manufacture are commonly utilized in many industries, such as automation, robotics, sorting, medical, packaging, among others.
Features and Benefits:
3MM HTD® Pitch
22 Grooves
Suitable for a belt width of 15mm
Bore of 0.25"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost