-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
Available Upon Request
SAV-50-3M-15 X 5/16
Timing Belt Pulley. 3MM HTD® Pitch. 50 Grooves. for 15mm Wide Belt. 0.3125" Bore. Shalf Saver. Aluminum
Price
$22.80
| Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
|---|---|---|---|---|---|
| Price unit | $22.80 | $21.78 | $20.76 | $18.65 | |
| Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-50-3M-15 X 5/16
- Material
- Aluminum
- Pitch
- 3mm HTD
- No. of Grooves
- 50
- Pitch Dia.
- 1.880
- Outside Dia.
- 1.850
- Flange O.D.
- NA
- Hub Type
- Shaft Saver
- Belt Width
- 15
- Type
- 6
- Bore (+.001 - .000)
- 0.3125
- Face Width
- 0.763
- Overall Length
- 1.111
- Hub Proj.
- -
- Hub Dia.
- 1.250
- Set Screws
- 8-32(2)
- Alt. Part Number
- 50-3M-15 X 5/16
SAV-50-3M-15 X 5/16, which has 50 grooves, is one of the timing belt pulleys available in our Inch Product Catalog. It is designed for 3MM HTD® pitch and 15mm wide belts. The entire part is made of Aluminum.
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.
Features and Benefits:
3MM HTD® Pitch
50 Grooves
Suitable for a belt width of 15mm
Bore of 0.3125"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.
Features and Benefits:
3MM HTD® Pitch
50 Grooves
Suitable for a belt width of 15mm
Bore of 0.3125"
Made of Aluminum
Suitable with our timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
