-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
-
-
Timing Belt Pulleys
-
Timing Pulley Stock
-
Timing Pulley Flanges
-
Timing Belts
-
Timing Belt Tensioners
-
Available Upon Request
SAV-26-5M-09 X 1/4
Timing Belt Pulley. 5MM HTD® Pitch. 26 Grooves. for 9mm Wide Belt. 0.2500" Bore. Aluminum. Shaft Saver
Price
$30.84
| Quantity Range | 1 - 9 | 10 - 24 | 25 - 49 | 50 - 99 | 100+ |
|---|---|---|---|---|---|
| Price unit | $30.84 | $28.83 | $26.82 | $21.28 | |
| Lead time | 7 weeks | 7 weeks | 7 weeks | 7 weeks |
SAV-26-5M-09 X 1/4
- Material
- Aluminum
- Pitch
- 5mm HTD
- No. of Grooves
- 26
- Pitch Dia.
- 1.629
- Outside Dia.
- 1.584
- Flange O.D.
- 1.750
- Hub Type
- Shaft Saver
- Belt Width
- 9
- Type
- 6F
- Bore (+.001 - .000)
- 0.2500
- Face Width
- 0.547
- Overall Length
- 0.852
- Hub Proj.
- -
- Hub Dia.
- 1.063
- Set Screws
- 8-32(2)
- Alt. Part Number
- 26-5M-09 X 1/4
SAV-26-5M-09 X 1/4 timing belt pulley is a stock product made of Aluminum, which is suitable for 5MM HTD® pitch and 9mm wide belts, and has 26 grooves. This pulley is the 6F type and features 2 flanges.
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.Features and Benefits:
Made of Aluminum
26 Grooves
5MM HTD® Pitch
Bore of 0.25"
For 9mm wide belt
Suitable with our timing pulley belts.
Compatible with York’s timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
Our timing belt pulleys are a component of synchronous drives, commonly utilized in a variety of industries such as medical, automation, robotics, sorting, packaging, and more.Features and Benefits:
Made of Aluminum
26 Grooves
5MM HTD® Pitch
Bore of 0.25"
For 9mm wide belt
Suitable with our timing pulley belts.
Compatible with York’s timing pulley belts.
Shaft Saver installation
York is ISO 9001 certified. All products are RoHS/REACH compliant.
Shaft-Saver:
• Direct replacement for standard timing pulleys
• Won’t mark shafts – won’t leave a pit, hole, or indentation
• Makes removing or readjusting the pulley on the shaft easy
• Works on hardened and ground or cold rolled shafts – just about any metal!
• Grips the shaft as tightly as a standard set screw
• Grips and holds through grease, oil or dirt
• Reusable at least 10 times if you need to move the pulley on the shaft
• RoHS and REACH compatible
• In stock and low cost
